30
September 2020
Installation, Operation and Maintenance Manual
MAN 571_EAC Rev. 1
Operation and Use
Section 3: Operation and Use
3.5
Calibration of Micro-switches (If Foreseen)
(Refer to Safety Instructions Manual for limit switch box)
!
WARNING
Refer only to technical documentation related to installed switch-box model.
NOTICE
Operate only the micro-switch corresponding to the direction of operation being carried
out, as clearly reported on the micro-switch. End of stroke microswitches should be
operated before the stop of the stroke of the actuator due to mechanical stops. Adjust the
relative cams properly.
Figure 27
Mechanical Stop on the Housing
