EN
8
Operating Notes
•
If you want to prepare sauces, soups or nut milk, add the ingredients in 2 to 3 steps, depending on their hardness. The
content should not be too little, but also not too much. Too many ingredients in one process may lead to overheating
and automatic shutdown of the motor.
In that case, please wait until the device cools off as described above (see page 5).
•
Always keep the lid closed during the operation of your
originale
. This avoids any scalding or splashes of hot foods.
•
Never put your hands into the mixing container during operation to avoid injuries. Do not dip any objects into the mixing
container during operation, since otherwise the motor, blades and other parts of the device can be destroyed. Except for
the supplied tamper TL that may only be used through the lid opening (Fig. [2], page 1), since it cannot contact the blades
through the opening for the measuring beaker. On page 17, you will find the description of the tamper.
•
When preparing hot drinks, soy milk or soups, make especially sure that the lid is closed well and your
originale
is standing
securely. It is advisable to first start at low speed and to increase it gradually. Alternatively you can use the Pulse mode or
one of the preset programmes (soup, sauce or soy milk, see page 14).
•
Always pour liquids and soft ingredients first into the mixing container and afterwards the harder ingredients, such as ice
cubes, green leaves, etc.
•
If the chosen programme or the manual mode is finished, please wait until the blades are fully stopped before removal of
the mixing container, otherwise the connection can be damaged.
•
If a singed smell exudes from the motor block, stop the device immediately and disconnect the power supply. The smell
can result from abrasion of the rubber bearing of the connection if it was not mounted correctly. In this case please contact
your
customer service immediately.
•
When preparing thick and sticky ingredients such as dough, it can happen that the motor and the blades turn idly, this is
because an air bubble has formed in the ingredients, stop the programme and remove only the measuring beaker. Your
can remove the air bubble through the opening with the included tamper TL. Replace the measuring beaker and continue
the preparation.
