EN
13
Operating
originale
Connect your
originale
to a power socket with the correct electric specifications. You can find them on the type plate at the
back side of the device and in chapter „Technical Data“ on page 32. Make sure that the power plug is properly inserted into
the power socket.
Start-up
In order to use your
originale
, it is necessary to put on the mixing container on the motor block properly. Without mixing
container your
originale
does not start. If you put the container on the engine block, you will hear a long beep and both the
display as well as the buttons light up briefly. Now your
originale
is in energy saving mode.
Energy Saving Mode
1
To switch on the device, place the mixing container (Fig.[1], page 2) on the locking mechanism (Fig.[10], page 2), this switches
the display on for 1 second and then automatically changes into the energy saving mode
1
. In this mode the display is switched
off, only the On/Off button (Fig. [14] page 2) is lit red.
Standby Mode
You only have to press a button on the control panel or turn the Jog-dial to switch the device from energy saving mode to
standby mode. Make sure that the mixing container is put on properly. In this mode the display shows „
00:00
“ minutes and the
speed is set to “
3
” and all symbols on the control panel are lit and flashes.
Your
originale
automatically changes to Energy Saving Mode after 3 Minutes of inactivity.
Measuring Beaker, Lid and Seal Ring
Place the measuring beaker (Fig. [1], page1) in the opening of the lid (Fig. [2], page 1) and twist it tight towards the right.
Now, place the lid firmly on the mixing container. Turn the measuring beaker to the left to take it off, and lift it off the lid.
You can remove the seal ring from the lid for easy cleaning. Please take care, that the seal ring is placed in the lid after
cleaning.
1
Power consumption in Energy Saving Mode: 0,339 Watt
