BHBikes e-motion, Руководство пользователя

Страница: 53 / 131

53
Use of the LCD control console functions
1. Instant battery consumption indicator
The instantaneous consumption indicating bar presents six segments or levels. The more segments
displayed, the greater the instantaneous consumption. This indicator may be used to achieve better
battery efficiency.
Attention: When the instantaneous consumption is very low, the indicator may not display any
bar segments
2.
State of the battery's charge level
The charge level is displayed by means of an indicator with five segments or levels. A higher number
of segments indicates a higher level of remaining energy. Each segment represents approximately 20%
of the total battery capacity. When the battery is close to full discharge, the first segment will start to
flash.
3.
Setting functions TRIP, AV, ODO, MAX to zero
The TRIP, AV and MAX counters are set to zero when pressing the MODE button for 3 seconds. This
reset does not affect the ODO total distance counter.
4. Total elimination of data
Press the MODE button and the button at the back of the control console simultaneously.
Attention: This action eliminates the ODO total distance travelled and the wheel measurement.
After the total elimination of data is performed, the wheel measurement will flash on the display screen.
Follow the steps described in point 5 to establish this value.
5.
Entering the wheel measurement (circumference)
Press the MODE and BOOST buttons
simultaneously for 3 seconds in order to enter the
wheel's circumference. It shall not be necessary if a
total elimination of the data was performed
previously.
Press the MODE button to increase the value and the
BOOST button to reduce it. Press the LIGHT button
to save the value.
Value selection range: 10mm – 3999mm
Standard value: 1973mm
Circumference calculation: Diameter of the wheel (at the recommended pressure) x 3.14
6. Automatic power off
The assistance system and the control console automatically switch off if remaining inactive for over 10
minutes.
Display when entering the wheel’s
measurement data