39
The angle of installation
beyond 30 degree
Fix again till the suitable position
The voice is jumping
Magnetic head is dirty or the
plate has some flaws
Clean the magnetic head or change a
new plate
The wire is not connected
well
Connect the wire well
The radio doesn’t
work and can’t auto
select wave band
The signal is too weak
Select the wave band by yourself
K.4 Operation of New Style Control Panel selected use .-
K.4.1
Insert plug (F) into the mains socket (G), Fig.24.
Plug the power cord into the wall outlet.
Set the On/OFF power switch, located at the top of the sauna roof, to position 1, Fig.24A.
Fig.24 Fig.24A
K.4.2
Turn the key ON/OFF.
-Press the key ON/OFF. The Power indicator turns on.
The Temperature Display indicates the real temperature of the room.
-Press the key ON/OFF again. The POWER indicator turns off.
Exterior panel
K.4.3
Adjust the temperature.-
-Press the key
+
or
-
under the temperature display to adjust the temperature. It changes in 1º by each
press.
-The set temperature will flash for 5 seconds before returning to the room temperature.
-Press the key Fº/Cº for changing to show from Fahrenheit to Celsius. The highest temperature we can set is
140ºF or 60ºC, the lowest temperature we should set is more than 68 ºF or 20ºC.
K.4.4
Adjust the time.
Press the key
+
or
-
under the Time & EQ display to adjust the time. It changes in 1 minutes for each press.
The adjusting time scope is from 1 minutes to 60 minutes.