28
D.2 Pay careful attention to the following steps during assembly and installation.-
D.2.1
Place the Bottom Panel step
(1)
on the ground and make sure the “FRONT”sticker is facing up.
-Next take the rear panel as shown in step (2) and Fig.1.
Fig.1
In this step, one person holds the rear panel while the other person fastens the retaining buckles, Fig.2.
D.2.2
Buckle
fastened
Fig.
2
Buckle
loose
Fig.
3
Fig.2 Fig.3
- Next fit the left side panel as shown in step (3) and Figs.4-5.
- Fit the right side panel as shown in step (4), Fig.6, and buckle it on.
Fig.4 Fig.5 Fig.6
