background image

X1 Elliptical

 

29 

WARRANTY

 

USA Warranty 

Warranties may vary in other countries.    See your local BH Fitness Dealer. 

WARRANTY SUBMITTAL 

Please have the following information available when contacting your dealer or BH for warranty support. 

  A copy of the dated purchase receipt or credit card statement.   

  An explanation of the problem/malfunction or parts that are missing or damaged. 

  Owner’s name, address and phone number. 

  Model and Serial Number (when available). 

 

Forward your information to BH North America by 

FAX: (949) 206-0013 

E-mail:  

[email protected]

 

Mail to:    20155 Ellipse, Foothill Ranch, California 92610, USA   

 

For troubleshooting assistance or to confirm your claim please phone: 

(949) 206-8152   

(800) 475-7899 (USA only)   

(866) 325-2339 (USA & Canada) 

 

BH FITNESS 

extends the following exclusive, limited warranty, which shall apply only to the use of the 

device in the home. Any other use of the device shall void this warranty. 

FRAME

 – Lifetime (Home Warranty) 

BH Fitness warrants the Frame against defects in workmanship and materials for Lifetime from the date 
of original purchase, so long as it remains in the possession of the original owner for home use. 

 
PARTS

 – 3 Years (Home Warranty) 

BH Fitness warrants all original parts against defects in workmanship and materials for a period of three 
years from the date of original purchase, so long as the device remains in the possession of the original 
owner for home use. 
 

 

 

Содержание X1 - V2
































Отзывы: