X1 Elliptical
27
COMPUTER OPERATION
8. Pulse recovery
This function is used to measure your Health Index according to your heart rate change in the
first minute after exercising.
After turning on the unit, press
to enter heart rate recovery. If exercise finishes or
pause blinking “
P
” appears on the screen, hold
to reset and then press
to enter
heart rate recovery. 10 seconds before the test, the computer will begin to detect the heart rate
signal (Fig. 1). If there is no heart rate signal, the computer will return to non-exercise status.)
Fig. 1
If there is heart rate signal, then the computer will enter 60 seconds counting down. (Fig. 2).
Fig. 2
