BH FITNESS SK-9900, Руководство пользователя

Страница: 9 / 35

Page 8
BH Fitness SK9900
ASSEMBLY GUIDE
5. FIT THE TOP TRIM COVER AND BOTTLE HOLDER
Figure 4. Position the cover (D) so as to avoid hitting the Monitor. Move the cover (D) in the
direction of arrows (1), (2) and (3). Position the cover (D) over the side tubes of the main
body (B). Secure using screws (J).
Figure 4A. Remove the screws from the main post (B). Position the bottle holder (M) and
secure it by using the screws previously removed.
6. ADJUST THE SEAT
Figure 5. The seat position can be slid forwards or backwards by pressing lever (U)
upwards. Lever (U) is on the lower right side of the seat.
Release the lever to lock the seat into a position.
7. VIEW PULSE SENSOR
Figure 8. View the pulse sensors (Y) located on the handlebar. The users pulse rate is
measured by placing both hands on pulse sensors (Y).
8. LEVELING
NOTE: For safety, maintain a minimum clearance around the equipment. Maintain 18
inches on the front and each side plus 24 inches at the rear of the unit.
Figure 6. Once the unit has been placed into its final position, make sure that it sits flat on
the floor and that it is level. Screw the adjustable support blocks (R) up or down to level the
unit.
9. MOVEMENT & STORAGE
Figure 7. The unit is equipped with wheels (W) making it easier to move about. The two
wheels at the front of the unit make it easy to store the unit away.
10. CHARGE THE BATTERY
Figure 9. Connect the DC terminal end of the 15V, 1 amp adapter (N) to the connector.
Connect the plug end of the AC/DC adapter (N) into a 110-120V outlet.
NOTE:
This unit is equipped with a generator (dynamo) that converts the mechanical rotation
(produced by the exercising user) into current (electrical energy) to power the electronic
monitor and brake controller.