BH FITNESS SK-9900, Руководство пользователя

Страница: 23 / 35

Page 22
BH Fitness SK9900
CONSOLE OPERATION
PROGRAM MODE
The monitor has: 1 MANUAL profile program; 8 pre-programmed PROGRAM profiles; a user
programmable profile (USER) as well as a male TEST, female TEST, steady pulse rate (HRC)
and distance programs.
The pre-programmed program graphs are shown on page 33.
P0 MANUAL MODE
Once the monitor is on it will display the profile and the letter “M” for manual on the LED array
(A) Figure 11, and the “WELCOME TO HI – POWER” message on the bottom alphanumeric
screen (B) Figure 11.
You can start the program in manual mode by pressing the QUICK / START key.
The flashing top LED array (A), Figure 11, will indicate the exertion level being produced during
exercise. By pressing the level
▲▼ keys you can increase or decrease the exertion levels
between twenty different settings.
Every 10 seconds the alphanumeric screen (B), Figure 11, will switch between displayed
readings for values relating to: MILES PER HOUR (MLH); TIME; CALORIES; PULSE RATE
and in the second sequence: RPM; DISTANCE; WATT and PULSE RATE.
The monitor will calculate the average exercise values after the exercise program is finished or
interrupted by pressing the STOP key. These values will be displayed twice every five seconds
on the bottom alphanumeric screen (B), Figure 11. The average values for EXERCISE TIME
HHMMSS; DISTANCE COVERED ML; AVERAGE SPEED MLH; CALORIES BURNT KCAL
will be displayed.
If the keys are not touched and exercise does not occur while the average values are being
displayed, then the “M” will appear on the top LED array.