10
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person is
recommended when assembling this
unit Take the unit out of its box and
make sure that all of the pieces are
there Fig.1:
(72) Monitor; (16) Main body; (18)
Handlebar; (17) Handlebar stem; (10)
Saddle post; (12) Horizontal saddle
tube; (13) Saddle; (4) Rear stabiliser
bar with adjustable feet; (15) Front
stabiliser bar with wheels; (1L) Left
pedal; (1R) Right pedal; (7) (21) (22)
Knobs.
1.
Position the machine’s rear stand
on the rear stabilizer bar (4), as shown
in Fig.2, insert the bolts (3), fit the flat
washers (5) and cap nuts (6) and then
tighten securely.
2.
Position the front stabiliser bar with
wheels (15) with the wheels facing
forwards, as shown in Fig.2, insert the
bolts (3), fit the flat washers (5) and
cap nuts (6) and tighten securely.
3.- ATTACHING THE SADDLE.-
Fit the saddle bracket (13), Fig.3, onto
the horizontal saddle tube (12), as
shown in Fig.3, fit the saddle into
position and tighten the nuts on the
bracket securely.
Next insert the horizontal saddle tube
(12) through the hole on the saddle
post (17), Fig.3, position it correctly
and tighten the knob (7), Fig.3.
Insert the saddle post (17) into the
boss on the main body (16), position it
correctly and tighten the saddle post
by using the adjustment knob (7),
Fig.3, turning it clockwise.
ADJUSTING THE SADDLE HEIGHT.-
Loosen the saddle post adjustment
knob (7) slightly by turning it
anticlockwise, Fig.3, move the saddle
to a position comfortable for doing
exercise and then tighten the
adjustment knob (7) securely by turning
it clockwise.
Stay within the references without
going beyond the “STOP” mark.
HORIZONTAL ADJUSTMENT OF
THE SADDLE.-
Loosen the knob (7) slightly by turning
it anticlockwise, Fig.3, move the
saddle to a position comfortable for
doing exercise and then tighten the
knob (7) securely by turning it
clockwise.
Stay within the references without
going beyond the “STOP” mark.
4.- FITTING THE HANDLEBAR.-
Position the handlebar (18) on the
handlebar stem (17), Fig.4, tighten the
knob (22) con screen (25) and then
insert the handlebar stem (17) into the
hole on the main body (16), Fig.4.
Position it correctly and then tighten
knob (7) by turning it clockwise.
ADJUSTING THE HANDLEBAR
HORIZONTALLY.-
Position the handlebar (18) at a
comfortable
distance
for
doing
exercise, now tighten knob (7)
securely, Fig.4.
Stay within the references.
ADJUSTING THE HANDLEBAR
VERTICALLY.-
Position the handlebar (7) at a
comfortable
distance
for
doing
exercise, now tighten knob (7)
securely, Fig.4.
Содержание H9179
Страница 2: ...2 Fig 1 Fig 2 Fig 3...
Страница 3: ...3 Fig 4 Fig 5 Fig 6 Fig 7...
Страница 4: ...4 Fig 8...
Страница 33: ...33 H9179...
