10
English
ELECTRONIC MONITOR
MAINS CONNECTION
Insert the jack (m) for the transformer
into the connection hole (k) on the
main body (bottom, rear of the
machine)
and
then
plug
the
transformer into a 220 V mains supply.
(Fig 1A Mod. G2465; Fig 1B
Mod.H8715)
.
Note
: The transformer is only
necessary to charge the battery after
long periods of inactivity. Disconnect
the transformer before using the
machine.
To give you greater control over your
exercise, this electronic unit provides
simultaneous read-outs of speed,
distance,
exercise
time,
watts,
calories burnt and pulse rate.
If at any time during exercise you
press the START/STOP button then
all of the unit’s functions will stop.
Pressing the START/STOP button
again will restart the machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 90 seconds.
Important:
Deposit
electronic
components in special containers, Fig. 2.
MONITOR FUNCTIONS
This monitor has 7 keys: RECOVERY,
TOTAL RESET, START / STOP;
RESET, ENTER; UP
▲
; DOWN
▼
.
The program level you have selected
is shown simultaneously in the central
section of the display. The windows at
the bottom of the display show the
TIME; RPM/ SPEED; DISTANCE;
WATT/CALORIES; PULSE RATE.
This monitor also has 1 manual program,
12 pre-set exertion level programs; 1
WATT program; 4 Heart Rate Control
programs; 4 user defined programs.
The monitor will switch on displaying
the message U1 in the centre of the
screen. Select the user, between U1-
U4, using the
▲
/
▼
keys and then
press the ENTER key.
Next the Male / Female symbols will
appear, Select using the
▼▲
keys and
press ENTER to confirm. Then Age will
appear, select using the
▼▲
keys
(between 1 to 99) and press ENTER to
confirm. It will now ask for your height,
select using the
▼▲
keys (between
100 to 200 cm) and press ENTER to
confirm. Weight will appear, select
using the
▼▲
keys (between 20 to 150
kg) and press ENTER to confirm.
CHANGING
FROM
ONE
WORK MODE TO ANOTHER
This monitor allows you to work in 4
different modes: Manual, Program,
User and Pulse (TARGET HR). In
order to pass from one mode to
another press the START/STOP
button to stop the monitor, then press
RESET and, with the help of the
▲
/
▼
buttons and ENTER key, select the
desired mode.
MANUAL FUNCTION
After entering your personal data the
LEDs for the various programs will start
flashing the monitor USER, MANUAL,
PROGRAM and HRC.
Press the
▲
/
▼
keys to select the
MANUAL function and press ENTER.
Press the START / STOP key to start
exercising and use the
▲
/
▼
keys to
increase or decrease the exertion level.
Содержание G2465
Страница 2: ...2 Fig 1A Fig 1B Fig 2 Fig 3 Fig 4 ...
Страница 3: ...3 Fig 5A Fig 5B ...
