background image

General aspects 

1-2

 

 

1.2 

Warning notes 

The following warning notes are used in these operating 
instructions: 

  

This warning level indicates an imminent hazardous situa-
tion. 

If the hazardous situation is not prevented, this will result 
in death or severe injury. 

Follow the instructions that accompany this warning to 
prevent the risk of death and severe personal injury. 

  

This warning level indicates an potentially hazardous situ-
ation. 

If the hazardous situation is not prevented, this may result 
in death or severe injury. 

Follow the instructions that accompany this warning to 
prevent the potential risk of death and severe personal in-
jury. 

  

This warning level indicates an potentially hazardous situ-
ation. 

If the hazardous situation is not prevented, this may result 
in slight or moderate injuries. 

Follow the instructions that accompany this warning to 
prevent the injury of persons. 

  

This warning level indicates potential damage to property. 

If this situation is not prevented, it may result in damage 
to property. 

Follow the instructions that accompany this warning to 
prevent damage to property. 

  

A notice indicates additional information that will make the 
handling of the device easier. 

 

Содержание 5012

















































Отзывы: