BFI Automation 5012, Оригинальная инструкция по эксплуатации

Страница: 21 / 48

Technical data
3-1
3 Technical data
3.1 General characteristic features
•
Relay loadable with max. 250VAC/1A / 300VA
•
Current output of the CFC 3000 looped (amplitude)
•
Additional current output in dependence of the flame
modulation frequency, end frequency adjustable in 16
steps
•
Additional current outputin dependence of the DC-sig-
nal
•
Both additional mA outputs adjustable to 0/4 to20mA
•
Fused loop of the 24 V DC power supply of the CFC
3000
•
Converts RS232 signals of CFC3000 into RS485 sig-
nals for longer distances (max. 1.200 m).
•
Network of up to 64 flame monitoring systems with
CFC NET software for operator in control room.
•
Freely allocatable bus addresses between 0 and 63
•
Inbuilt BUS termination resistor
•
Supply voltage selectable between 24 V DC and100-
240 V AC
•
DIN rail or wall mounting
3.2 Factory settings of the converter 5012
The converter is delivered with the following settings:
Initial value current outputs: 4 mA (DIP 1 = ON)
Current Relay Function (CRF): Off (DIP 2 = OFF)
Sensitivity change-over: Off (DIP 3 = OFF)
BUS termination: Off (DIP 4 = OFF)
Address: 0 (DIP 5/6 = OFF and address switch = 0)
Frequency switch: 60 HZ