• This unit is in line with European Standard EN 60601-1-2 (i
n accordance with C ISPR 11, IEC61000-3-3,
IEC61000-4-2, IEC61000-4-3,
IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8,
IEC61000-4-11 ) and is subject to particular precautions with regard to electromagnetic compatibility (EEC).
Please note that portable and mobile HF communication systems may interfere with this unit.
• This device is in line with the EU Medical Devices
Directive 93/42/EEC, the “Medizinproduktegesetz” (Ger
-
man
1: Gen -
3: Supplementary requirements for
– Part 2 – 30: Particular requirements for the safety and essential performance of automated non-invasive
blood pressure monitors).
• The accuracy of this blood pressure monitor has been carefully checked and developed with regard to a
long useful life. If using the device for commercial medical purposes, it must be regularly tested for accu
-
racy by appropriate means. Precise instructions for checking accuracy may be requested from the service
address.
• We hereby confirm that this product complies with the European RED Directive 2014/53/EU.
The CE Declaration of Conformity for this product can be found under:
13. Warranty / service
warranty for this product, subject to the requirements below and to the extent described as follows.
from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 5 years, commencing from the purchase of the new, unused product from
the seller.
The warranty only applies to products purchased by the buyer as a consumer and used exclusively for perso
-
nal purposes in the context of domestic use.
German law shall apply.
During the warranty period, should this product prove to be incomplete or defective in functionality in accor
-
dance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in
accordance with these warranty conditions.
If the buyer wishes to make a warranty claim, they should approach their local retailer in the first
instance: see the attached “International Service” list of service addresses.
The buyer will then receive further information about the processing of the warranty claim, e.g. where they
can send the product and what documentation is required.
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner,
with
– a copy of the invoice/purchase receipt, and
– the original product.
