Adopting the correct posture
• To carry out a blood pressure measurement, make sure you are sitting upright and
comfortably. Lean back and place your arm on a surface. Do not cross your legs. Place
your feet next to each other flat on the floor.
• A
• To avoid distorting the measurement, you should remain as still as possible during the
measurement and not speak.
Selecting the user
This device has 2 user memories with 120 memory spaces each in order that you can save measurements from
If multiple people are using the device, make sure that the relevant user is set before each measurement.
To do so, proceed as follows:
• Press the setting button
+
or
-
• Using the
+/-
setting buttons, set the desired user and confirm your selection with the
Start/stop button
.
Performing the blood pressure measurement
Measur
ement
• To start the blood pressure monitor, press the
Start/stop button
. A ll display
elements are briefly displayed.
• The blood pressure monitor will begin the measurement automatically after approx. 3 seconds.
• T
the pulse symbol
is displayed.
You can cancel the measurement at any time by pressing the Start/stop button . The remaining air
is released quickly once the measurement is complete. The remaining air is released quickly once
the measurement is complete.
• The systolic pressure, diastolic pressure and pulse measurements are dis-
played, and the LED risk indicator gives you a classification of your measured
values using various colours.
•
appears if the measurement could not be performed properly. I
n this case,
please read the section “What if there are problems?”.
