BETCO Lil Bertha XSM 24, Руководство оператора

Страница: 30 / 32

30
Brush Drive
Shaft Top
Brush Mount
Plate Top
Brush Mount
Plate Bottom
See Note
Front Access
Panel
Remove propane tank. 1.
Remove front access panel to gain access to the brush drive shaft tops. 2.
Lay the machine on its side with the brush drive plate installed. 3.
The brush drive shaft and brush mount plate are LEFT HAND THREADS. 4.
Using a 3/4" open end wrench place it on the wrench flats of the brush drive shaft top. 5.
Place an 1 1/4" socket in the center of the brush mount plate on the bristle side. 6.
Unscrew the brush mount plate from the brush drive shaft while securing the brush drive shaft with the 3/4" 7.
wrench.
Now you'll need to remove the brush from the brush mount plate. 8.
Using a 1/2" wrench and 1/2" socket unscrew the nuts which hold the brush onto the brush mount plate. 9.
Note: When reassembling brush and brush mounting plate place bolts in through the brush mount plate
down through brush and put nuts on the bristle side of the brush.
BRUSH CHANGE