BETCO Lil Bertha XSM 24 Скачать руководство пользователя

Страница: 28 / 32

Main Drive Belt

Tensioner Bolt

Main Drive Belt

Tensioner

Access Plate

Main Drive Belt

Tensioner Bolt

Main Drive Belt

Tensioner Body

Main Drive Belt

Tensioner Pulley

Clutch

Main Drive

Belt Pulley

Main Drive

Belt

Removal

Remove main drive belt tensioner access plate.

Remove front access panel bolts and panel.

Loosen main drive belt tensioner bolt using a 3/4" wrench.

Through the front access slip the belt up over the main drive pulley of the brush drive plate.

You can finish removing the main drive belt through the rear opening of the machine under the handle.

Installation

Insert the new main drive belt through the rear opening of the machine under the handle.

Place the main drive belt around the clutch while ensuring the main drive belt tensioner pulley is in the

correct location.

Put the opposite end of the main drive belt on top of the main drive belt pulley of the brush drive plate.

Through the front access finish inserting the main drive belt into the main drive belt pulley groove.

Tensioning

Insert a 1" wrench into the tensioner access slot onto the main drive belt tensioner hex on the main

drive belt tensioner body.

Pull the wrench toward the front of the machine to tension the main drive belt.

While holding the 1" wrench in place tighten the main drive belt tensioner bolt with a 3/4" wrench.

Reposition the 1" wrench to add more tension to the main drive belt.

While holding the 1" wrench in place then loosen the main drive belt tensioner bolt with the 3/4" wrench.

Repeat steps 2 and 3.

Repeat steps 5 and 6 until the main drive belt is tensioned properly. (2 or 3 repetitions)

MAIN DRIVE BELT

Содержание Lil Bertha XSM 24

































Результаты поиска

Содержание Lil Bertha XSM 24

Отзывы:

Похожие инструкции для Lil Bertha XSM 24

Бренды по названию

Популярные бренды

BETCO Lil Bertha XSM 24, Руководство оператора

Результаты поиска

Содержание Lil Bertha XSM 24

Отзывы:

Похожие инструкции для Lil Bertha XSM 24

Бренды по названию

Популярные бренды