BETCO Genie B, Руководство оператора и каталог запасных частей

Страница: 17 / 40

17
1. ELECTRICAL SYSTEM SAFETY
The machine is equipped with self-resetting thermal safety fuses located in the
electric box beneath the solution tank. These fuses interrupt the power supply
to the brush and suction motor when the machine exceeds the predetermined
current limit. To restore power to the motor, switch off the machine and wait
for the fuses to cool down. If the switch interrupts power supply again, contact
Betco technical service assistance.
2. INSUFFICIENT WATER ON THE FLOOR
A. Verify that the solution tank is clean.
B. Verify that the solenoid valve switch is turned on.
C. Verify the quick disconnect is properly connected.
D. Verify the adjustment of the ball valve that supplies water.
E. Verify the vent pin on the solution tank cap is lowered.
3. THE MACHINE DOES NOT CLEAN WELL
A. Check the condition of the brushes or pad. Replace them as required.
Brushes must be replaced when the tufts are roughly 5/8” (15 mm) long.
4. THE SQUEEGEE DOES NOT DRY THE FLOOR
A. Verify that the squeegee blades are clean.
B. Verify that the vacuum hoses are properly installed and seated on the squee-
gee.
C. Verify the vacuum hose nozzle is clean.
D. Replace worn squeegee blades.
E. Check squeegee guide wheels for wear or damage.
5. EXCESSIvE FOAM PRODUCTION
Verify that low-foam detergent is being used. Add defoaming chemical to the
recovery tank.
More foam is generated when the floors are not very dirty. Dilute the detergent
more when cleaning floors that are not very dirty.
TROUBLESHOOTING GUIDE