BETCO Genie B, Руководство оператора и каталог запасных частей

Страница: 3 / 40

3
Immediately check, when receiving the machine, that all the materials indicated on delivery documents have been received and
also that the machine has not been damaged in transit. If it has been damaged, this damage must be immediately reported to
the shipper and also to our customer’s service department. Only acting promptly in this manner will make it possible to receive
missing material and to be compensated for damage.
INTRODUCTION
This is an automatic scrubber which, via the mechanical action of the
rotating brush and the chemical action of a water/detergent solution, can
clean any type of hard flooring. As it advances, it also collects the dirt
removed and the detergent solution not absorbed by the floor.
The machine must be used only for this purpose. Even the best ma-
chines will only work well if used correctly and kept in good working
order. We therefore suggest you read this instruction booklet carefully and
re-read it whenever difficulties arise while using the machine. If necessary,
remember that our assistance and customer service is always available for
advice or direct intervention.
RECEIVING THE MACHINE
Serial # Plate
SYMBOLS USED ON THE MACHINE
Valve symbol
Used to indicate the solenoid valve switch
Power symbol
Used to indicate the machine's power is on
Vacuum motor symbol
Used to indicate the vacuum motor switch
Maximum solution temperature gauge
Located near the solution tank inlet