Beta RR 4T-250, Руководство по ремонту

Страница: 155 / 215

1
GENERAL INFORMA
TION
92
GB
CHANGING THE WHEEL CIRCUMFERENCE AND THE UNIT
This operation is to be performed by an authorized BETAMOTOR workshop.
SLEEP MODE
One minute after the last pulse from the speed sensor has been received, or after the
button was last depressed, the microcontroller switches to a power-saving status
named Sleep Mode. In order to save power, all standard instrument activity is sus-
pended, the display and the backlighting are turned off (if the vehicle has no battery
the backlighting is automatically turned off as soon as the engine is switched off) and
only the clock remains in operation. The system can go into Sleep Mode regardless
of the selected function.
WAKE UP (from Sleep Mode)
The system wakes up from Sleep Mode whenever:
•
The instrument receives a signal from the speed sensor.
•
The button is depressed.
As soon as the microcontroller wakes up the following happens:
•
The display and the warning lights are checked (all the warning lights come up
providing that power is supplied by the vehicle) for about 2 seconds.
•
The selected wheel circumference and number of wheel pulses are displayed for
about 2 seconds.
•
The last function in use when the system went into Sleep Mode is activated.
If the waking up takes place through the electronic transmission (i.e. without press-
ing the button), the instruments immediately switch to the standard operating mode
without checking the display and the warning lights and without showing the se-
lected wheel circumference and number of wheel pulses.
STARTER BUTTON
Starter button 1 is located on the right-hand
side of the handlebars and operates the
electric engine starter. Push the button until
the engine starts.
Do not press the button
1
while the engine
is running.
1