Beta RR 250 2T EUROPA 2019, Руководство пользователя

Страница: 49 / 146

3
ADJUSTMENTS
47
EN
STATIC SAG LOAD TEST
To verify the static sag of the shock ab-
sorber proceed as follows:
- Place the motorcycle on the work stand.
- Measure the vertical distance between
the rear wheel axle and a reference point
on the rear fairings.
- Write down the dimension H
1
.
- Remove the work stand.
- Keep the motorcycle in vertical position
and measure again the distance between
the wheel axle and the reference point
previously established.
- Write down the dimension H
2
.
Verify that the value of the static compres-
sion X = H
1
- H
2
matches the one shown
on page 12. Otherwise, perform the
adjustment of the spring preload as de-
scribed above.
H
1
H
2
SUSPENSIONS SETTINGS ACCORDING TO THE WEIGHT OF THE RIDER
The table below shows the spring constant K of the suspensions (fork and shock
absorber) depending on the weight of the driver.
Refer to the accessories catalogue Betamotor to obtain the spring codes.
Fork
Rider weight [kg] K (Spring constant)
70 - 85 4,2
85 - 95 4,6
95 - 105 4,8
>105 5
Shock absorber
Rider weight [kg] K (Spring constant)
< 60 4,8
60 -70 5
70 - 80 5,2
80 - 90 5,4
90 - 100 5,6
>100 5,8
Standard settings