Beta RR 250 2T EUROPA 2019, Руководство пользователя

Страница: 48 / 146

3
ADJUSTMENTS
46
EN
ADJUSTING THE SPRING PRELOAD
Loosen counter-ring
E
, rotate ring
F
clock-
wise to increase the spring preload (and
consequently the shock absorber preload)
or anticlockwise to decrease it. After ob-
taining the desired preload, turn counter-
ring
E until it stops against adjusting ring F .
For standard setting, refer to page 12.
NOTE: for the handling of ring nuts use the
specific wrench provided in the standard
tool kit shown in the figure.
F
E
C
D
ADJUSTING THE HYDRAULIC
COMPRESSION DAMPER (HIGH
AND LOW SPEEDS)
Adjustment for low compression speed:
%
Using a screwdriver, loosen screw C
by turning it clockwise to increase the
hydraulic compression damper.
For standard setting, refer to page 12.
Adjustment for high compression speed:
%
Turn knob D anticlockwise to decrease the
hydraulic compression damper.
For standard setting, refer to page 12.
WARNING:
Starting from the standard position, turn
the knob anticlockwise (with a closing ac-
tion), the center screw will have an integral
movement, then will rotate with the knob.
For standard setting, refer to page 12.