Beta 019490011, Инструкция по эксплуатации

Страница: 7 / 16

7
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
Air supply connection
For optimal use of the pneumatic tool, always keep to a maximum pressure of 15 bars, as measured
at the tool inlet. Feed the pneumatic tool with clean, condensate-free air. Excessively high pressure or
humidity in supply air results in shorter life for the mechanical parts and may damage the tool.
USE
Fit the inflator connector onto the valve of the tyre to check.
Press buttons (+) / (-) to inflate the tyres and check their pressure.
Adjust pressure with deflating button (-); when the button is released, the tyre pressure will immediately
be displayed.
Each tyre inflator was tested and is supplied with a testing certificate complete with testing data.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact
Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordan-
ce with the laws in force in your country.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a
12-month warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective
pieces or replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this
warranty will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In
addition, this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced
or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
1949GPN ok.indd 7 20/09/16 13:56