background image

5

 

ISTRUZIONI PER L’USO 

I

INSTRUCTIONS FOR USE

EN

TYRE INFLATOR, ITEM 1949GPN  

OPERATION MANUAL AND INSTRUCTIONS FOR TYRE INFLATOR MANUFACTURED BY: 

BETA UTENSILI S.P.A.  

Via A. Volta 18, 

20845, Sovico (MB) 

ITALY
Original documentation drawn up in ITALIAN.

PURPOSE OF USE

The tyre inflator can be used for the following purposes:

• inflating and checking tyre pressure in cars, motorcycles, lorries, earth moving vehicles;

• use with air or nitrogen.   
The tyre inflator must not be used for the following operations:  

• the tyre inflator must not be used to inflate or check the pressure of tyres containing anti-puncture

  liquids;

• the operation buttons must not be locked with adhesive tape or clamps

• the tyre inflator must not be used for any applications other than recommended ones.
WORK AREA SAFETY   

 

          Keep children and bystanders away from your workplace while operating the tyre inflator. 

          Distractions from other people can cause you to lose control over the pneumatic tool.

    
          Beware of the danger of tripping over the air hose.

PNEUMATIC TOOL SAFETY

• Check the connections and the air supply lines. All units, couplers and hoses should conform 

  to the product specifications in terms of pressure and air volume. Too low pressure impairs the function 

  of the pneumatic tool; too high pressure can cause damage and/or injury.
• Do not bend or tighten any hoses. Avoid using solvents and sharp edges. Keep the hoses away from

  heat, oil and rotating parts. Immediately replace any damaged hose. A defective feed pipe may cause 

  uncontrolled movements of the compressed air pipe. Raised rust or chips may cause eye injury. 

  Make sure that the hose clamps are always secured firmly. 
PERSONNEL SAFETY

• Stay alert; watch what you are doing. Do not use the pneumatic tool while tired or under the influence 

  of drugs, alcohol, or medication.
Always use the following personal protective equipment:

• eye protection
• Do not point the air flow to yourself or other people. Compressed air can cause serious injury.  
• Do not directly inhale the exhaust air, and prevent it from getting into your eyes. The exhaust air 

  of the pneumatic tool can contain water, oil, metal particles and impurities, which may cause hazards.

1949GPN ok.indd   5

20/09/16   13:56

Содержание 019490011

















Отзывы: