82
• Válasszuk ki az impulzusok frekvenciáját (120-150 Hz) a nyilakkal (az injektornak másodpercenként
leadott vezérlések száma).
Majd nyomjuk le az gombot.
• Válasszuk ki a kívánt paramétereket, majd nyomjuk le a gombot. Ezt követően beindul
a munkaciklus, amely a beállított időtartam végén le fog állni.
A főmenübe való visszalépéshez, nyomjuk meg az gombot.
LEHETSÉGES MEGHIBÁSODÁSOK:
A készülék nem kapcsol be:
• Ellenőrizzük le a 220V hálózati meglétét
• Ellenőrizzük le a biztosíték épségét
Nincs vezérlés:
• -Ellenőrizzük le, az egy vagy több injektort a megfelelő kimenetre csatlakoztattuk-e
• Ellenőrizzük le, hogy a kábelen van-e bármiféle megszakadás
• Ellenőrizzük le a csatlakozási végleteket
PWM áram túlterhelését jelző vészjel:
• A kimenet túl van terhelve
• Rövidzárlat
•
A vészjel kikapcsolásához kapcsoljuk ki az elektromos vezérlőegység generátorát, majd kapcsoljuk be újra
• Az egység csatlakoztatása nélkül ellenőrizzük le, hogy újra bekapcsol-e a vészjel
KARBANTARTÁS
A javítási és karbantartási munkálatokat kizárólag szakember végezheti. Az ilyen beavatkozásokhoz
forduljanak a Beta Utensili S.P.A. javítási központjához.
INITIAL PWM - AUTO
PWM DEVICES
PULSE FREQ.
250
hz
3. FÁZIS
HASZNÁLATI ÚTMUTATÓ
HU