73
INSTRUKCJA OBSŁUGI
PL
• Wybrać częstotliwość impulsów (120-250 Hz) za pomocą strzałek (ile razy wtryskiwacz jest
sterowany w ciągu sekundy)
Następnie przycisnąć klawisz
• Wybrać żądane parametry i nacisnąć klawisz START W ten sposób rozpocznie się
cykl, który zakończy się na koniec ustawionego czasu.
Aby wrócić do menu głównego nacisnąć klawisz
MOŻLIWE ANOMALIE:
Brak zapłonu:
• Sprawdzić obecność 220V
• Sprawdzić integralność bezpiecznika
Brak sterowania:
• Sprawdzić, czy wtryskiwacz lub wtryskiwacze zostały podłączone do właściwego wyjścia
• Sprawdzić czy nie ma przerw w okablowaniu
• Sprawdzić stan zacisków przyłączeniowych
Lampka alarmowa przeciążenia PWM:
• Przeciążenie na wyjściu
• Zwarcie
• Wyłączyć generator sterowania elektrycznego, aby wyjść ze stanu alarmowego i włączyć go ponownie
• Sprawdzić, przy odłączonym komponencie, czy nie powtórzy się alarm
KONSERWACJA
Prace konserwacyjne i naprawcze powinny być wykonywane przez wykwalifikowany personel.
Odnośnie tych interwencji można kontaktować się z centrum serwisowym Beta Utensili S.P.A.
INITIAL PWM - AUTO
PWM DEVICES
PULSE FREQ.
250
hz
FAZA 3