Beta Motorcycles X Trainer 300 2T 2015, Руководство по ремонту, Страница: 68 / 117

3
66
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
3.8 MAIN GEAR ANd CLUTCH
UNIT
Before reassembling the clutch unit, carry out
some checks on the various components de-
scribed below.
3.8.1 Primary gear check
Check teeth of main gear is without nicks or ab-
normal wear. On the contrary, replace it
3.8.2 Primary gear
application
Apply the O-ring 18 , the spacer 12 and gear 14
on the right half shaft so the appropriate groove
inserts inside the Woodruff key 17 . Apply lock nut
15 prior depositing of medium strength thread-
locker. Fastening torque must be at 160Nm.
This is possible once the clutch case is inserted
using primary special tool
A (code 026140010
000) . See Par. 3.8.3 to apply the clutch case.
Attention! The nut is fastened anti-clockwise
Exploded view of pinion unit.
Fastening of the main gear nut.
160Nm
A