Beta Motorcycles X Trainer 300 2T 2015, Руководство по ремонту, Страница: 59 / 117

3
57
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
Application of forks to gearwheels.
Introduce the forks together with the drive bush-
es on the gear tracks. To be precise; the smaller
fork 5 drives the sliding gear on the primary unit,
while the other two ( 6 ) drive the sliding gears
on the secondary unit.
Note:
the two forks
6
are interchangeable and
their positioning is univocal, since the drive pin
must face the desmodromic device. Place the
forks in their original positions if none of the
components are replaced.
Insert the desmodromic device in the specific
bearing. In order to do this, it is necessary to
rotate cam stop lever towards the top part of
the engine 7 .
Position the fork 5 of the primary unit in the cen-
tral guide of the desmodromic device 8 , insert
the fork pin inside the fork itself and insert the
pin in its proper seat in the half-casing.
5
6
6
7
Insertion of desmodromic deice in specific bearing. Note
the rotation of the stop lever.
place fork 5 of the primary unit in the central guide of
desmodromic device 8.
5
8