Beta Motorcycles X Trainer 300 2T 2015, Руководство по ремонту, Страница: 54 / 117

3
52
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
3.4.2 Primary unit assembly
Before proceeding with reassembly, clean all the
elements thoroughly and oil them with gear oil.
Always replace the circlips.
Clamp the mainshaft 1 (using protective jaws), so
that the grooved end faces downwards.
ExplODED vIEW OF pRIMARY UNIT:
1) Main shaft;
2) Roller cage 22x26x13;
3) Fifth on primary;
4) Thrust washer;
5) Seeger sw15;
6) Third and fourth on primary;
7) Thrust washer;
8) Sixty on primary;
9) Second on primary;
10) Thrust washer 17x30x1
Insert onto the lower cylinder part of the shaft:
the roller cage 2 , the 5th gear ( 3 ) (turning the
front claw clutches upwards), the 26x32x1.5
thrust washer 4 and the circlip 5 .
Insert the III – IV sliding gear ( 6 ) so that the
smaller gear faces downwards, and then insert
the circlip 5 .
Insert the 23x32x1.5 thrust washer 7 , the roller
cage
2
, the 6th gear (
8
) (with the front claw
clutch facing downwards), the 2nd gear ( 9 ) (with
the cavity facing upwards) and finally the 17x30x1
thrust washer 10 .