BESV TRB1, Техническое руководство

Страница: 10 / 25

10
3 Nm
1
2
A
B015-0
3.3 Drive unit
-
Drive unit (C16162)
-
3 x M8 hex serrated flange nut (C34175)
-
Torque wrench
-
SW 13 nut driver
-
M8 hex serrated flange nut = 25-30 Nm
3.3.1 Fitting the drive unit
Make sure the assembly position is correct
when fitting the drive unit.
Take care to avoid bending or pinching any
existing cables during assembly.
 Place drive unit (1) into the drive
mount (2) from the right (in direction of
travel).
-
Make sure that the through holes (A) are
lined up.
-
Check that the drive unit (1) runs
smoothly and has some play after positi-
oning in the drive mount (2).

Use hex nuts (3) to secure drive unit (1).
-
Tighten hex nuts (3) with the correct
torque.
Cable routing
-
Route cables according to your own spe-
cifications. For more information, see
“Cable assignment” on page 11.