BESV TRB1, Техническое руководство

Страница: 22 / 25

22
4.6 Battery Bracket
- Battery bracket
- 1 x M4x10 hexagon socket screw,
- 2 x M6x12 hexagon socket screw
(
truss head),
- 2 x M6x10 hexagon socket screws
(
cap head) and 5 x M6x12 hexagon socket screws (cap head)
- SW 3 hexagon socket wrench
- SW 4 hexagon socket wrench
- SW 5 hexagon socket wrench
- Torque wrench
- 1 x M4x10 hexagon socket screw = 0.1-0.3 Nm
- 2 x M6x12 hexagon socket screw
(
truss head) = 7-9 Nm
- 2 x M6x12, 5 x M6x12 hexagon socket screw
(
cap head) = 7-9 Nm
4.6.1 Removing the Battery bracket
- Loosen and lift up the battery bracket for only 5~10cm without cable rerouting.
 Loosen and remove mudguard and screws.
 Loosen slider screw and slide up the battery housing.

Loosen and remove bracket screws on motor housing.
 Loosen and remove bracket screws on upper tube
 Lift up the battery bracket for 5~10cm