10
Draining the Spa
NOTE:
Drawings for illustration purposes only. May not reflect actual product. Not to scale.
Spa Repair
For Spa inflatable cover
If the spa is torn or punctured, use the provided
heavy-duty repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
For Spa Liner
If the spa is torn or punctured, use the provided PVC repair patch and glue (not included)
following these steps:
1. Clean and dry the area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch. Make sure the glue is
evenly distributed.
4. Wait for 30 seconds and then place the cut patch with glue over the damaged area.
5. Smooth out any bubbles of air that may be trapped underneath, and press firmly for two
minutes.
6. Wait 30 minutes before inflation.
7. The product is once again ready for use. Repeat this process should further leaks occur.
NOTE:
DO NOT use hard brushes or abrasive cleaners.
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.
Cleaning the spa
DEFLATION
2.
3.
4.
5.
1.
Only for Hydro-Jet Pro
6.
7.
8.
9.
NOTE:
Lift up the spa
when there is only a little
water left. Damages to the
handles are not covered
under the warranty.
NOTE
: Twist and pull out the
Jet Nozzle, and turn the spa
upside down to dry the water
pipe.
10.
11.
12.
NOTE
: Dry the SPA pool
(only for Hydro-Jet Pro)
Only for Hydro-Jet Pro
13.
NOTE
: Dry the SPA pump (only for Hydro-Jet Pro)
2.
P6611
P61813
P61726
P61725
HYDROJET PRO
HYDROJET
P61725
Cover
2
P61726
P61725
P61727
S-S-005136
