Bestway field-pro IV 1600, Руководство оператора

Страница: 28 / 96

Raven 450 Controller
Overview
The control valve used with the Raven 450 Control
system is placed in an in-line location. In addition, the Raven
control may be equipped with either a wheel drive or a radar speed sensor.
Installation
The Raven installation manual should provide most of the installation information
required. However, the following instructions are intended to help when mounting the Raven
flow meter into the existing plumbing on the Field-Pro IV sprayer.
1. Disassemble the plumbing as illustrated in Figure 1.
2. Re-Locate gauge tee next to valve stack inlet as
illustrated in Figure 2.
3. Install the remaining plumbing using the flow meter
and butterfly valve from the Raven controller kit as illustrated in
Figure 2.
4. Refer to the sprayer control owner’s manual for installation of remaining con-
troller components.
5. Connect wiring as shown in diagram on page C11.
Raven 450 Spray Control Kit
REF P/N DESCRIPTION QTY
1 RE063-0171-894 1 1/2" BUTTERFLY VALVE 1
2 RE063-0171-793 FLOW METER, RFM-60P 1
3 150-G GASKET, FLANGED FITTING 2
FC200 CLAMP, 2" FLANGED FITTING (not shown) 2
C9
Figure 1.
Figure 2.