Bestway field-pro IV 1600, Руководство оператора

Страница: 24 / 96

NOTE:
IMPORTANT:
Initial Preparation of the Sprayer
1. Lubricate the boom pivot points per the lubrication information in this manual prior to initial
operation and at prescribed intervals thereafter. Also, make sure all tires have been properly inflated
prior to each use.
2. Read all other manuals provided with the Field-Pro IV sprayer, including those that pertain
to the controller and pump.
3. If the control valve plumbing has not been pre-installed on the sprayer, follow the directions
provided in this section for installation procedure.
4. Refer to the pump operating instructions (provided with the sprayer) to make sure the pump
or tractor hydraulic system has been adjusted to match pressure and flow requirements. In general,
there are three types of hydraulic systems used on agricultural tractors: Load Sensing, also known
as pressure-flow compensating closed center (LS); Pressure Compensating Closed Center (PC), and
Open Center (OPEN). The flow of hydraulic oil is regulated in a different manner for each type of
system. If you are in doubt about the type of system used on the tractor that will be used to operate
the Field-Pro IV, consult the tractor’s operator’s manual or your tractor dealer.
Failure to regulate oil flow to the pump will cause
motor damage.
Open center hydraulic systems can not operate
both a hydraulic driven solution pump and the
hydraulic boom control manifold equipped on this sprayer. PTO driven solution
pumps are recommended when using tractors with open center hydraulics.
C5