Bestway field-pro IV 1600 Скачать руководство пользователя страница 6

Страница: 6 / 96

All safety statements in this manual, as well as those found on safety decal's, are preceded by

the following warning symbols. Carefully read and follow the instructions provided.

Indicates and imminently hazardous situation that, if not

avoided, will result in death or serious injury. This signal

word is to be limited to the most extreme situations typically for machine components

which, for functional purposes, cannot be guarded.

Indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury, and includes hazards that

are exposed when guards are removed. It may also be used to alert against unsafe practices.

Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to

alert against unsafe practices.

The IMPORTANT notice gives important instructions to prevent

damage to the machine or systems.

A Note will give general information about the correct operation

and maintenance of the machine and systems.

DANGER:

WARNING:

CAUTION:

NOTE:

IMPORTANT:

Содержание field-pro IV 1600

































































































Результаты поиска

Содержание field-pro IV 1600

Отзывы:

Бренды по названию

Популярные бренды

Bestway field-pro IV 1600, Руководство оператора

Результаты поиска

Содержание field-pro IV 1600

Отзывы:

Бренды по названию

Популярные бренды