unit will not be used over an extended period of time.
B. Use the rechargeable battery and the power adaptor that come with this device only.
(Output: DC5V 1A)
C. To maximize the life of the rechargeable battery, please recharge only when the
battery low message is indicated
D. Avoid any contact of two poles of the battery and keep away from fire.
Magnetism
The speaker of this unit has magnetism, please do not place it close to any equipments
which apply with magnetism theory to avoid unwanted demagnetization or effect.
Note:
Any damage caused by the above reasons is not covered by warranty.
2. How to Use CyberDict for the First Time
A.
Insert the Lithium-ion rechargeable battery which comes with this device
into the battery compartment.
B.
Press [ON/OFF] to turn on your CyberDict. If the screen remains blank,
please check the following the steps:
¾
Be sure the battery is securely in place.
¾
Press [Shift] +
/
to adjust the LCD contrast for optimal screen
viewing.
C.
Press [RESET] and follow the instructions shown on the screen.
¾
Tap the centers of the targets
“
+
＂
to calibrate the sensitivity and accurate
position of touch panel, there are 3 targets to be tapped: lower left, upper right
and the center.
¾
After the touch panel correction, a selection window appears:
∗
Tap [No] to access the main menu.
∗
Tap [Yes], all the default settings will be used.
∗
If you tick [Clear User Data] and tap [Y], all your personal data and settings
will be deleted, then access the system’s date and time setting screen.
∗
Tap [F1] to set the format of date and time.
∗
Tap [Finish] to confirm. A default startup screen will be shown.
2
