X
X
X
X
X
X
X
X
X
X
X
X
8.
Install a OSB panel on the right side of the wall
panel. Cut OSB as previously instructed.
6.
Install a OSB panel flush with left side of wall frame. Before installing OSB, cut the OSB
flush with the side of the door opening and the top 2x4 plate.
7.
Cut to fit and install a 20"x48" OSB panel above the door opening. Cut OSB flush with the
bottom of the door header.
Step 4
Assemble Front Wall Frame
2x8 Door Header
78-1/2" Header Support
nail
nail
1.
Cut (2) two 2x4-12' boards to a length of 144" for wall plates. Position the boards together and
indicate with 'X' Marks where the wall studs will be located.
Install these Studs Centered
2x4 Blocks
2.
Install (6) six pre-cut wall studs between the wall plates where shown.
33"
33"
72" Between Header Supports
Flush
Flush
Cut OSB Flush
3.
Remove (2) two 2x4s screwed
to the pallet. Cut both to a
length of 78-1/2" and install
as header supports where
shown. Nail to studs with 10d
sinkers.
4.
Install the door header on the
2x4 header supports. Nail to
the stud with 10d sinkers.
5.
Measure space between header
and top plate. Cut (4) four
pieces to this length from a
pre-cut stud. Equally space the
(2) center blocks. Nail through
top plate and toenail to header.
Use 10d sinkers.