Step 20 Install Pocket Doors Track
Galv. Sill
5.
Install the treated door sill behind the door
opening. There needs to be a space between the
treated sill and the inside wall. To position the
sill, insert a 2-1/2" screw between the treated
sill and the inside wall as a spacer. Screw the
sill to the floor with (6) six 2-1/2" long screws.
Remove the screw used as a spacer.
2x3 Track Support Assembly
2.
Install the other track support assembly.
2x8 Door Header
View From Inside
View From Inside
Screw Used
as Spacer
Treated Sill
Board
Notch in Sill
Building Tip; run a bead of caulking where
flashing, treated sill and aluminum sill
meet to prevent moisture from penetrating.
!
82-3/4"
to Floor
1.
Install a 68-1/2" long Track Support Assembly 82-3/4" from the floor. Important: measure
from the bottom of the 2x3 on the support assembly to the floor. Insure the notched end of
track is center of door opening. Use 2-1/2" screws.
Notch
