Berthold BTwave LB 571-02, Руководство по эксплуатации

Страница: 21 / 52

LB 571 BTwave 5 Commissioning
68847BA2 Rev.00, 10/2020
17
5.3 Electrical Connection
The resonator electronics and its electrical connections are implemented inside the
mechanics.
The following electrical interfaces can be found on the device: 24 VDC / 10 A supply
voltage, 3x digital inputs, 2x digital outputs, 2x current outputs. These connections
are described in this section. The inrush current of the resonator is 10 A.
NOTE
Only components approved by Berthold may be used to commission the de-
vice.
1
2
3
4
5 Hex socket screw M4x10
Locking washer
Cover
Cable gland cap nuts
O ring seal
Figure 6 Remove cover
Tip
For devices that are already in operation the cover of the housing can be diffi-
cult to remove. Therefore, loosen a cap nut of a cable gland to reduce the
negative pressure.
1. Loosen 4 hex socket screws (Figure 6, Pos.1) and remove cover (Figure 6,
Pos.3) carefully.

The connections (Figure 7) are visible.
2. Open the cap nuts of the cable glands (Figure 6, Pos.4) and insert the cables.