24
Threading the Overlock Left Needle
(Yellow)
(A On Needle Clamp)
–
Continue to thread points
(4)
–(
9)
.
–
Thread the left needle as indicated
(1)
–(
9)
.
–
Raise Presser foot to release Tension discs.
–
The position of the thread must be behind the
thread guide.
–
Draw about 4" (10 cm) of thread through needle
eye towards the rear of machine.
–
Place the thread to the back, under the presser
foot.
Before threading eye of needle, slip thread behind
thread guide located on the bottom of the needle
clamp.
–
Thread the eye of the right needle
(9)
.
1
9
7
8
1
2
3
4
5
7
6
8
9
4
5
6
7
8
9
10cm
(4”)
1
9
7
8
1
2
3
4
5
7
6
8
9
4
5
6
7
8
9
10cm
(4”)
1
9
7
8
1
2
3
4
5
7
6
8
9
4
5
6
7
8
9
10cm
(4”)
1
9
7
8
1
2
3
4
5
7
6
8
9
4
5
6
7
8
9
10cm
(4”)
CAUTION:
Be sure to turn off power switch.
PLEASE NOTE:
Slip thread into the rear slot on the thread guide
(5)
and bottom slot of take–up lever cover
(6)
.
Then slip thread into the right slot on the thread
guide
(7)
, and into the right slot on the thread
guide
(8)
.
PLEASE NOTE:
Use of tweezers in the accessory case will make
needle eye threading easy.
–
Pass thread from back to the front through the
thread guide
(1)
.
