manualshive.com logo in svg

Bernina 740 Favorite, Руководство пользователя

Поделиться
Скачать
Bernina 740 Favorite Скачать руководство пользователя страница 93

Decorative stitches

91

Pintuck foot

Number

Description

# 46C (optional accessory)

5 grooves

In combination with the 1.6 –
2.5 mm double needle

For very light to medium-weight
fabrics.

Working with cord

A more distinctive and relief-like effect can be achieved when the pintucks are corded, which means that
they are sewn with an additional pintuck cord. Chose a pintuck cord that fits well into the grooves of the
selected pintuck foot. The cord must be colorfast and shrinkproof.

> Switch off the machine and disconnect it from the power supply.
> Remove the needle.
> Remove the presser foot.
> Remove the stitch plate.
> Open the hook cover.
> Pull the cord through the hook opening from the bottom and through the opening of the stitch plate.
> Replace the stitch plate.
> Close the Looper cover.
> Make sure that the cord slides through the thread slot of the bobbin cover.

> Place the spool on the spool holder.

> Check that the cord runs smoothly.

Содержание 740 Favorite











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды