manualshive.com logo in svg

Bernina 740 Favorite, Руководство пользователя

Поделиться
Скачать
Bernina 740 Favorite Скачать руководство пользователя страница 45

Sewing preparation

43

> Guide the thread to the left into the rear thread guide (2).
> Guide the thread around the bobbin winder pretension clockwise (3).
> Wind the thread clockwise 2 – 3 times around the empty bobbin (4).

2

3

4

> Pull the excess thread over the thread cutter at the engaging lever (5) and cut.

5

> Push the engaging lever (6) towards the bobbin.

6

– The machine winds and the display to wind the bobbin appears.

> Set winding speed.
> To stop the winding process, the engaging lever must be pushed to the right.
> Push the engaging lever towards the bobbin again to continue the winding process.

– As soon as the bobbin is full, the machine stops the winding process automatically.

> Remove the bobbin and cut the thread using the thread cutter at the engaging lever.

Threading the bobbin thread

Prerequisite:

•

The needle is raised.

•

The machine is switched off and the bobbin cover is opened.

Содержание 740 Favorite











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды