Bernina 740 Favorite Скачать руководство пользователя страница 36

Страница: 36 / 138

Sewing preparation

2.8 Presser foot

Adjusting the presser foot position via the knee lifter of the Free Hand System

> Adjust the sitting height so that the knee lifter can be operated with the knee.
> Push the knee lifter with the knee to the right to raise the presser foot.

– Simultaneously the feed dog is lowered and the thread tension is released.

> Release the knee lifter slowly to lower the presser foot.

Adjusting the presser foot position via the button «Presser foot up/down»

> To raise the presser foot, push the button «Presser Foot Up/Down».
> To lower the presser foot, push the button «Presser Foot Up/Down» again.

Changing the presser foot

> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up.

> Remove the presser foot.
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.

Having the presser foot displayed in the User Interface

For each selected stitch, the machine displays the recommended and any other alternative presser feet.

Prerequisite:

•

The machine is switched on.

> Select a stitch pattern.

– In the icon «Presser foot indicator / presser foot selection» the recommended presser foot is indicated

with a number.

Содержание 740 Favorite











































































































































Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды

Bernina 740 Favorite, Руководство пользователя

Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды