manualshive.com logo in svg

Bernina 740 Favorite, Руководство пользователя

Поделиться
Скачать
Bernina 740 Favorite Скачать руководство пользователя страница 101

Buttonholes

99

9.5 Cord

Using cord with the Buttonhole Foot with Slide #3A

The cord reinforces and enhences the buttonhole and is particularly suitable for the Standard
buttonhole No. 51. Optimal cord is Perle cotton No. 8, strong hand-sewing thread and fine crochet yarn. It is
recommended not to hold the cord when sewing.

Prerequisite:

•

The  Buttonhole foot with slide #3A is fitted and raised.

> Insert the needle at the beginning of the buttonhole.
> Guide the cord on the right side under the buttonhole foot with slide.
> Hook the cord over the pin at the back of the buttonhole foot with slide.

> Pull the cord on the left side under the buttonhole foot to the front with slide.

> Pull the cord ends into the slits.
> Lower the buttonhole foot with slide.
> Sew the buttonhole in the usual manner.
> Pull the cord loop until the loop disappears in the bartack.

Содержание 740 Favorite











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды