Bernina 740 Favorite Скачать руководство пользователя страница 39

Страница: 39 / 138

Sewing preparation

> Select the needle thickness (2) of the fitted needle.

Adjusting the needle position up/down

> To lower the needle, push the button «Needle Up/Down».
> To raise the needle, push the button «Needle Up/Down» again.

Adjusting the needle position left/right

There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.

> To position the needle position to the left, push the button «Needle left» (1).
> To position the needle position to the right, push the button«Needle right» (2).

Needle stop up/down (permanent)

> To set the needle stop position permanently, tap «Needle Stop Up/Down».

– The machine stops with needle position down as soon as the foot control is released or the button

«Start/Stop» has been pushed.

Содержание 740 Favorite











































































































































Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды

Bernina 740 Favorite, Руководство пользователя

Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды