Bernina 740 Favorite Скачать руководство пользователя страница 127

Страница: 127 / 138

Errors and faults

125

Message on the display

Cause

Solution

The calibration of the Buttonhole
foot with slide #3A has failed.

> Check the presser foot for ease of movement. If

necessary, remove lint, dust and fabric remnants.

> Clean the reflector with a soft, slightly damp microfiber

cloth.

> Check the position of the reflector. If necessary, correct

the position of the reflector or replace the presser foot.

> Check the plastic on the underside of the presser foot

for signs of wear. If necessary, replace the presser foot.

> Clean the feed dog.
> If the error still occurs, contact your authorized BERNINA

dealer.

13.2 Troubleshooting

Fault

Cause

Solution

Uneven stitch formation

Upper thread too tight or too
loose.

> Adjust the upper thread tension.
> Check the thread feed from the thread spool.

Needle blunt or bent.

> Replace the needle, make sure that a new BERNINA

quality needle is used.

Poor quality needle.

> Use a new BERNINA quality needle.

Poor quality thread.

> Use quality thread.

Incorrect needle/thread
combination.

> Match the needle with the thread size.

Incorrectly threaded.

> Rethread.

Fabric has been pulled.

> Feed the fabric evenly.

Uneven stitch formation

Incorrect bobbin case is used.

> Use the supplied bobbin case with triangles.

Содержание 740 Favorite











































































































































Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды

Bernina 740 Favorite, Руководство пользователя

Результаты поиска

Содержание 740 Favorite

Отзывы:

Бренды по названию

Популярные бренды