Radio motion detector comfort 1.1 m/2.2 m quicklink
Page 1/18
6W-5827
09-2012
Radio motion detector comfort 1.1 m/2.2 m quicklink
Order number 8534 51 ..
Operating instructions
1. Safety instructions
Electrical equipment may only be installed and assembled by a qualified electrician in ac-
cordance with the relevant installation standards, regulations, directives and safety and
accident prevention directives of the country.
Failure to comply with these instructions may result in damage to the device, fire or other
hazards.
The radio transmission is not suitable for safety or alarm applications.
Due to its detection behaviour the device is not suitable for use in burglary detection or
alarm systems.
These instructions are an integral component of the product and must be retained by the
end user.
2. Design and layout of the device
(3)
(4)
(5)
(2)
(1)
(6)
Figure 1: Design and layout of the device
(1) Insert (see "Accessories", not in scope of delivery)
(2) Frame (not within scope of delivery)
(3) Application module
(4) Motion detector design cover
(5) Screw for dismantling protection (not for design lines R.1/R.3)
(6) Interface between insert/application module
