BERKEM GALVALINK 302B, Руководство пользователя

Страница: 10 / 36

01/12/14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 10
Pyrex glass tanks. The machine includes a compartment (inside the machine casing) for 2 Pyrex glass
Tanks measuring 135 mm in diameter, with a 2 litre capacity and a graduated scale
from 500 to 1500 ml.
The Tanks are normally used for the following operations:
•
degreasing ( Fig. 6 TANK 1 )
•
galvanic treatment ( Fig.6 TANK 2 )
Anode electrodes. The machine is equipped with a set of anode electrodes in Titanium/platinised
( Fig.2-3 ) and stainless steel ( Fig.2-2 ).
Power cable The machine is equipped with the power cable with the plugs for connection to
the socket on the side of the machine casing and for connection to the voltage
socket which must be present in the installation place.
3.
WORK AND COMMAND STATIONS
3.1 General information
The machine is used for an individual workstation. All the commands to start and adjust the machine are
placed on the front, in the command position for the operator.
3.2 Work/command station set up
The machine must be placed on a flat horizontal surface to avoid any risk of overturning; on request, a
metal support can be supplied, suitable to support the machine. Installation must be carried out in a dry,
well-aired and correctly illuminated environment. Furthermore, the machine should have a nearby
water line suitable for cleaning the Tanks.
ATTENTION:
The machines, by operating, develop vapours due to electrolytic plating,
therefore they should be placed in a working place equipped with an
adequate suction hood.
ATTENTION: A n appropriate disposal system for the galvanic solutions must be used to
drain the solutions used during the operations, in compliance with the
instructions and with the
SDS Safety Date Sheets supplied
with the liquids.
4.
SAFETY DEVICES AND CAUTION FOR OPERATOR AND MAINTENANCE STAFF SAFETY
In the work area the machine does not produce a weighted average acoustic noise over 80 dB.
The machine does not have rotating parts which can come in contact with the operator.
The liquids used for galvanic baths, for plating operations, can be harmful, toxic, corrosive and
dangerous for the environment.
The operator must carefully read the instructions supplied with the plating products used and wear
appropriate IPD (apron, gloves, goggles) .
The machine, during operating, produces vapours that can be toxic, therefore the workstation must be
equipped with an adequate suction hood. It is good practice that the operator avoids smoking, eating or
drinking near the machine.
5.
DECLARATION OF CONFORMITY
The declaration of conformity of the equipment is attached to this manual.