BERKEM GALVALINK 302B, Руководство пользователя

Страница: 12 / 36

01/12/14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 12
Safety Data Sheets referred to the products used. The solution must be mixed before putting them in
the respective Tanks.
Place a sufficient amount of solution in the tanks, until the electrodes are covered. The solutions must
be placed in the tank on preparing the machine or when they are under the coverage level of the
electrodes or, lastly, when they are used up and must be replaced.
Before starting the working processes, check that the temperature probe is correctly immersed in the
solutions ( Fig.6 ).
OPERATIONAL PASSAGES TO OBTAIN A PERFECT END RESULT
1. degreasing in ultrasounds
2. rinsing in running water
3. electrolytic degreasing (Fig.6 - TANK 1)
4. rinsing in running water
5. rinsing in purified water
6. neutralisation/activation
7. rinsing in running water
8. rinsing in purified water
9.
galvanic treatment (see Fig.6 TANK 2)
10.
rinsing in running water
11.
rinsing in purified water
12. drying
6.3 Unplanned use of the machine.
There is no reasonably conceivable use of the machine other than for galvanic treatments.
6.4 Improper use of the machine.
Improper use is any use other than that specified in point 6.2 above.
7.
MACHINE MOVEMENT AND TRANSPORT
The machine dimensions and weight enable simple movements, using appropriate mechanical aids.
 Transport the machine by placing it in its original packaging or in other suitable packaging, with
parts inside in expanded polystyrene, taking care to transport the upper part of the machine
positioned upwards.
 To transport the machine, move it using a suitable trolley to transport objects.

Load only the machine on the trolley in its packaging without placing any other objects on it,
since this could damage the machine or fall. Do not load the machine over other objects because
it could cause unstable transport.

Before transport, check that all the parts of the machine are well fastened and cannot move
during transport.
8.
INSTALLATION
8.1 General information
The machine works in safe conditions and with the best results if it is correctly installed in the working
place.